JAKCOM CS2 Smart Carryon Speaker

Instructions

 

Product Profile

JAKCOM CS2 is a smart carryon speaker, with a small and light metal body, a high-volume high-resolution music speaker, BT 4.1 wireless connection, remote control cellphone photographing and selfie, 200mA fast-chargeable battery, hands-free calls, TWS series and other functions & features, suitable for assorted indoor or outdoor mobile scenarios.

 

Packing list:

Mainframe x 1

Micro-USB cable x 1

Lanyard x 1

Hanging ring x 1

Specification x 1

 

Structure specification:

     A   Speaker

     B   Button holes

     C   Function button

     D  Charging port

     E   Indicator light

     F   Microphone

     G  Skid-proof rubber mat

Function instructions

     Power on:

         Long press the Function button  for 3 seconds, the indicator light is lit.

     Power off:

         Long press the Function button  for 3 seconds, the indicator light goes out.

     Charging:

         Insert the Micro-USB plug of the USB cable into the charging socket , then insert the standard USB plug on the other end of the USB cable into an arbitrary USB interface charger allowable for current of above 5V1A, so as to start charging;

The indicator light is red when charging, and the indicator will be gone out after the charging.

     Bluetooth connection:

After the boot, the system automatically enters the state of waiting for pairing and connecting, then select "CS2" in the waiting for Bluetooth pairing list of the mobile phone or other smart devices to carry out pairing and connecting;

If a pairing code is needed in the connecting, please enter "0000", and after successful connection, the music or sound in the connecting device can be played;

If there is a device successfully connected before around, this speaker will be automatically connected to the device after power on.

     Switch Function:

         Double-press the Function button  to switch between "Music Control Mode" and "Selfie Control Mode". the speaker will make "beep" prompt tone when function mode is switching;

         The default mode is "Music Control Mode" after the boot, at this point click the Function button  for music pause or play;

In the "Selfie Control Mode", you can remote control to take picture by short press the function button @ in camera app, and the speaker will make a prompt tone as shutter sound.

     Call control:

In "Music Control Mode", when new calls come in, the speaker will automatically read out the call number;

Short press the Function button  to get through the call. After the call is gotten through, short press the Function button  to hang up the call;

If you do not want to answer an unconnected new call, long press the Function button  to hang up it.

TWS series:

     This function can make two CS2 connected in series and play music in the mobile phone at the same time.

Firstly, turn on one of CS2 and connect to the phone;

Then turn on another one;

Then the another one CS2 will automatically be connected in series with the first one in about 30 seconds.

 

FAQ:

Question: Fail to be turned on

Answer: Please check if the speaker’s battery has power, charge it, and try to turn it on again.

 

     Question: Fail to connect Bluetooth

Answer: If connect failed, please try to power off this speaker, and then power on it again, after that try to connect another phone’s Bluetooth, if connect successful, you can try this method to reconnect your phone again.

If you have to enter password for Bluetooth pairing, you can enter the default password “0000”.

 

     Question: Intermittent playing sound

Answer: Please check the audio files played and try other ones for testing.

Pay attention to avoid unduly long Bluetooth connection distance, or avoid other wireless device with 2.4GHz nearby, or try to move ambient metal objects. All these factors may interfere Bluetooth transmission. When the signal is not good enough, the phenomenon of intermittent sound happens.

 

Safety warning:

1. Overload power supply is prohibited for this product in case of abnormal temperature increase or fire;

2. Don’t use wet hands to plug or unplug power supply in case of electric shock;

3. If this product inside is sprayed with water or damp, please keep it in ventilated places until it is fully dried, then reboot for usage.

 

Service:

1. Any non-human failure in normal usage is included in the free one-year warranty for main product;

2. The quality problems don't include subjective objections, such as, personal dissent about sound quality, tone and so on;

a) Website : Http://www.JAKCOM.com

b) Email : service@JAKCOM.com

c) Cellphone+86 400 806 7311   

d) Service hours : 9 am – 9 pm GMT+8

e) Address : Unit 1 No.26 Shuangta Street Taiyuan City China